Vickers PV063R1K4T1NFT24221 Piston Pump PV Series

s1:32.55 mm; G:M6x1; B:65.1 mm; H2:138 mm; Designation of open end cover:SCOU212-38; C0:32.8 kN; Recommended tightening torque for set screw:16.8 Nm; d:60.32 mm; N:20mm; A:70 mm;

Shape:T-Shaped; C Chamfered:Not Provided; Volume Discount:Available; Width T(mm):15; Lateral Width L(mm):68; Type:Bearings with Housin; Days to Ship:6 Days or more; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea;

b:7.8 mm; B:31 mm; Fatigue limit load, Cu:26 kN; Min operating temperature, Tmin:-40 °C; d2:78.2 mm; Dynamic load, C:226 kN; D:120 mm; e:0.24; Associated sleeve reference:H313; Y2:4.15;

Machining:No; Accessory:With steel plate cov; Fit:J7; Diameter series symbol:Used for Light load; Unit, Type:Insert Bearing Unit; Stroke:No; Surface Treatment:No; Unit, Type:Insert Bearing Unit; Surface Treatment:No; Unit Body Material:Cast Iron;

A:37 mm; Designation of housing:T206N-; B:23.8 mm; L:113 mm; C:19.5 kN; Weight:1.28 kg; Designation of open end cover:SCOE206-30; S:9 mm; SW:4 mm; d:30 mm;

Specifications/Environment:Standard; Days to Ship:Same day; B:12; Raceway Ring Shape:Needle Roller; RoHS:6; Series:Standard; Load Direction:Radial; Size Standards:Metric System; Lubricant:No; Post-assembly heat treatment (pre-bent type):No;

ra max:0.6 mm; D:40 mm; da max:23 mm; Fatigue limit load, Cu:0.21 kN; f0:12.8; Brand:NTN; d:17 mm; Mass:0.07 kg; Dynamic load, C:9.6 kN; Characteristic inner ring frequency, BPFI:4.37 Hz;

e:2 mm; C:19.5 kN; H3:80; A1:9.5 mm; G:M6x1; A:21 mm; Designation of bearing:UC206-19G2; C0:11.2 kN; B:38.1 mm; d:30.16 mm;

Days to Ship:8 Days; Shape:Front Mount; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Height H(mm):35 ～ 55; Housing Material:1045 Carbon Steel; Holder Surface Treatment:Black Oxide Coating; Seals:VV (Non-Contact Rubb; Bearing I.D. d(mm):20;

s1:20.6 mm; L:137 mm; N:16mm; S:10.2 mm; A:38 mm; G:M6x1; e:22 mm; A2:53 mm; C:31.85 kN; Recommended tightening torque for set screw:8 Nm;

C:12.8 kN; N:M8; Z:63.3 mm; Designation of closed end cover:SCCE204; Designation of bearing:ES204G2; A:38 mm; H2:64 mm; C0:6.65 kN; B:21.4 mm; H:33.3 mm;

Shape:Flanged Pilot Type; Number of Bearings:Double; Shape:Flanged Pilot Type; Bearing Retained:No; Bearing I.D. d(mm):12; Bearing Part Number:6801; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No;

RoHS:6; Volume Discount:Available; Flange O.D. H(φ):36; Housing Material:1045 Carbon Steel; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Number of Bearings:Double; Flange Shape:Square Type; Holder Surface Treatment:Black Oxide Coating; Bearing Material:[Steel] Steel;

s1:19.05 mm; Designation of housing:FL206N-; Designation of closed end cover:SCC206; Weight:0.96 kg; C0:11.2 kN; A:31 mm; A2:40.2 mm; B:38.1 mm; N:16mm; L:80 mm;

Housing Material:1045 Carbon Steel; Width T(mm):35; Flange O.D. H(φ):47; Days to Ship:7 Days; Seals:VV (Non-Contact Rubb; Type:Bearings with Housin; RoHS:6; Bearing I.D. d(mm):8; Flange Shape:Square Type; Volume Discount:Available;